Sony MDR-RF895RK

Instrukcja obsługi Sony MDR-RF895RK

  • Wireless Stereo
    Headphone System
    ©2017 Sony Corporation Printed in Vietnam
    4-691-894-12(1)
    MDR-RF895RK
    Operating Instructions
    Mode d’emploi
    How to use
    Tips for charging
    Charge supplied battery first
    The supplied rechargeable nickel-metal hydride battery is
    not charged from the first time you use it. Be sure to
    charge them before use.
    About auto charge function
    Placing the headphones on the transmitter automatically
    turns them off, then charging starts. This eliminates the
    need for turning on/off every time you wear and take off
    the headphones.
    If CHARGE/RED indicator does not
    light up red
    Check if the right and left headphones are rested on the
    transmitter correctly. Take off the headphones and place
    them on the transmitter again so that the headphones’
    contact points meet the transmitter’s contact pins.
    Charging may not be completed if the transmitter’s
    contact pin and headphones’ contact point are dusty.
    Wipe them with a cotton bud, etc.
    Charging and usage time
    Approx. charging time Maximum usage time
    1)
    7 hours
    2)
    20 hours
    3)
    1) at 1 kHz, 0.1 mW + 0.1 mW output
    2) hours required to fully charge an empty battery
    3) Time may vary, depending on the temperature or
    conditions of use.
    To recharge supplied battery after
    use
    Place the headphones on the transmitter after use. The
    CHARGE/RED indicator lights up red, then charging starts.
    When charging is complete, there is no need to remove
    the headphones from the transmitter.
    Remaining battery
    To check the remaining battery charge of the headphones,
    turn on the POWER switch and check the POWER indicator.
    The battery is still serviceable when the indicator lights up
    green.
    Charge the headphones if the POWER indicator turns off,
    dims, flashes, or the sound becomes distorted or noisy.
    Notes
    Insert the AC adaptor plug firmly.
    Be sure to use the supplied AC adaptor. Using AC
    adaptors with different plug polarity or other
    characteristics can cause product failure.
    Unified
    polarity plug
    The battery capacity may decrease if the headphones
    are turned on and placed on the transmitter with the AC
    adaptor disconnected.
    The transmitter automatically turns off while charging
    the headphones.
    This system is designed to charge only the supplied
    rechargeable battery BP-HP800-11 for safety. Note that
    other types of rechargeable battery cannot be charged
    with this system.
    If dry batteries are installed, they cannot be charged.
    Do not attempt to use the supplied rechargeable battery
    BP-HP800-11 for other components. It is for use with this
    system only.
    Charge in an environmental temperature of between
    5 °C and 35 °C.
    When the battery life reduces to half, this may be the
    end of battery lifetime. The supplied rechargeable
    battery BP-HP800-11 is not commercially available. You
    can order the battery from the store where you
    purchased this system, or at your nearest Sony dealer.
    Do not touch the contact pins of the transmitter. If the
    contact pins become dirty, charging may not be
    possible.
    Charging may not be completed if the transmitter’s
    contact pins and headphones’ contact points are dusty.
    Wipe them with a cotton bud, etc.
    Using the headphones
    with separately-sold dry
    batteries
    Commercially available (LR03 (size AAA)) dry batteries can
    also be used to power the headphones. Install two
    batteries in the same manner as described in step 1 of
    “How to use.
    If you attempt to charge the headphones with dry
    batteries installed, the CHARGE/RED indicator lights up
    red for 15 seconds, then turns off. The battery charge
    function is not activated.
    Battery life
    Battery Approx. usage time
    1)
    Sony alkaline battery LR03
    (size AAA)
    24 hours
    2)
    1) at 1 kHz, 0.1 mW + 0.1 mW output
    2) Time may vary, depending on the temperature or
    conditions of use.
    Note
    Do not carry a dry battery together with coins or other
    metallic objects. It can generate heat if the positive and
    negative terminals of the battery are accidentally come
    into contact with metallic objects.
    Tips for connection
    When you connect the stereo mini cable (stereo mini
    jack) directly to an earphone jack (monaural mini jack),
    the audio signal may not be output through the right
    channel.
    Tips for volume setting
    If you connect the transmitter to the headphone jack of
    the A/V component, set the volume of the A/V
    component as high as possible but not so high that the
    audio signal becomes distorted.
    When watching videos, be careful not to raise the
    volume too high in quiet scenes. You may hurt your ears
    when a loud scene is played.
    Tips for sound effect
    Slide the switch to select the desired sound effect, OFF or
    VOICE.
    Position of
    switch
    Sound effect and suitable sound
    source
    OFF
    Normal playback of the
    headphones.
    VOICE
    Produces a clearer announcer’s
    voice.
    Notes
    The volume of the headphones may vary, depending on
    the input signal and the setting of the EFFECT switch.
    The sound effect may not be obtained depending on
    the input sound sources.
    Tips for better reception
    Receiving performance
    This system utilizes very high frequency signals in the 800
    MHz band so the receiving performance may deteriorate
    due to the surroundings. The following examples illustrate
    conditions that may reduce the reception range or cause
    interference.
    Inside a building with walls containing steel beams
    An area with many steel file cabinets, etc.
    An area with many electrical appliances capable of
    generating electromagnetic fields
    The transmitter is placed on a metal instrument.
    An area facing a roadway
    Noise or interfering signals exist in the surroundings due
    to radio transceivers in trucks, etc.
    Noise or interfering signals exist in the surroundings
    owing to wireless communication systems installed
    along roadways.
    Effective area of the transmitter
    The optimum distance is up to approximately 100 m
    without the system picking up some interference.
    However, the distance may vary depending on the
    surroundings and environment.
    If the system picks up some noise within the above
    mentioned distance, reduce the distance between the
    transmitter and the headphones, or select another
    channel.
    When you use the headphones inside the effective area
    of the transmitter, the transmitter can be placed in any
    direction from the listener.
    Even within the signal reception area, there are some
    spots (dead spots) where the RF signal cannot be
    received. This characteristic is inherent to RF signals, and
    does not indicate malfunction. By slightly moving the
    transmitter, location of the dead spot can be changed.
    Replacing the earpads
    The earpads are replaceable. If the earpads become dirty
    or worn out, replace them as illustrated below. The
    earpads are not commercially available. You can order
    replacements from the store where you purchased this
    system, or at your nearest Sony dealer.
    1 Remove the old earpad by pulling it out of the groove
    on the housing.
    2 Fit the new earpad in the groove of the housing.
    Make sure the earpad is set to the vertical position.
    Precautions
    When this system is not to be used for a long period of
    time, disconnect the AC adaptor from the AC outlet
    holding the plug, and remove the battery from the
    headphones to avoid damage caused by battery
    leakage and subsequent corrosion.
    Do not leave this system in a location subject to direct
    sunlight, heat or moisture.
    You may hear some noise when you disconnect the AC
    adaptor from the transmitter before taking off the
    headphones.
    Avoid exposure to temperature extremes, direct sunlight,
    moisture, sand, dust or mechanical shock.
    Please note that water does not splash, this product is
    not waterproof specification.
    Notes on headphones
    To reduce the risk of hearing damage
    Avoid using headphones at high volume. Hearing experts
    advise against continuous, loud and extended play. If you
    experience a ringing in your ears, lower the volume or
    discontinue use.
    Caring for others
    Keep the volume at a moderate level. This will allow you
    to hear outside sounds and to be considerate to the
    people around you.
    If you have any questions or problems concerning the
    system that are not covered in this manual, please consult
    your nearest Sony dealer.
    Be sure to bring the headphones and the transmitter to
    the Sony dealer when requiring repair work.
    Troubleshooting
    If you run into any problems using this system, use the
    following checklist. Should any problem persist, consult
    your nearest Sony dealer.
    No sound/Low sound
    Check the connection of the A/V component or the AC
    adaptor.
    Check that the A/V component is turned on.
    If you connect the transmitter to an A/V component
    using the headphone jack, raise the volume level on the
    connected A/V component within the range where the
    sound is not distorted.
    Change the radio frequency with the CHANNEL selector
    on the transmitter, then change the radio frequency to
    that of the transmitter with the AUTO TUNING button on
    the headphones.
    Use the headphones near the transmitter, or change the
    position of the transmitter.
    Charge the supplied rechargeable battery, or replace dry
    batteries with new ones. If the POWER indicator is still
    off after charging, take the headphones to a Sony dealer.
    Raise the headphone volume.
    The sound cuts off
    The transmitter turns off if no signal or low signal is
    input for 4 minutes. If you connect the transmitter to an
    A/V component using the headphone jack, raise the
    volume level on the connected A/V component within
    the range where the sound is not distorted.
    Distorted or intermittent sound
    (sometimes with noise)
    Use the headphones near the transmitter, or change the
    position of the transmitter.
    Do not place the transmitter on a metallic table.
    If you connect the transmitter to an A/V component
    using the headphone jack, lower the volume level on the
    connected A/V component within the range where the
    sound is not distorted.
    Change the radio frequency with the CHANNEL selector
    on the transmitter, then change the radio frequency to
    that of the transmitter with the AUTO TUNING button on
    the headphones.
    Charge the supplied rechargeable battery, or replace dry
    batteries with new ones. If the POWER indicator is still
    off after charging, take the headphones to a Sony dealer.
    Loud background noise
    If you connect the transmitter to an A/V component
    using the headphone jack, raise the volume level on the
    connected A/V component within the range where the
    sound is not distorted.
    Charge the supplied rechargeable battery, or replace dry
    batteries with new ones. If the POWER indicator is still
    off after charging, take the headphones to a Sony dealer.
    Do not place the transmitter on a metallic table.
    Use the headphones near the transmitter.
    The POWER/GREEN indicator flashes
    green
    No signal or low signal is input. Start playback of the A/V
    component, or raise the volume of the connected A/V
    component within the range where the sound is not
    distorted, otherwise the transmitter will turn off. If no
    signal or low signal is input for about 4 minutes, the
    transmitter turns off automatically.
    Battery cannot be charged/
    CHARGE/RED indicator flashes red,
    or does not light up red
    Check that the right/left of the headphones and
    transmitter correspond, and put the headphones on the
    transmitter correctly.
    Install the supplied rechargeable nickel-metal hydride
    battery. Dry batteries and rechargeable batteries other
    than the supplied cannot be charged.
    If the CHARGE/RED indicator does not light up red even
    though you put the headphones on the transmitter and
    wait for a while, it may be the end of battery lifetime.
    You can order the supplied rechargeable battery
    BP-HP800-11 from the store where you purchased this
    system, or at your nearest Sony dealer.
    Charging may not be completed if the transmitter’s
    contact pin and headphones’ contact point are dusty.
    Wipe them with a cotton bud, etc.
    Short usage time (the supplied
    rechargeable battery)
    Clean the + and − terminal of the supplied rechargeable
    battery and the charging terminal of transmitter/
    headphone with a dry cloth.
    Recharge the supplied rechargeable battery after the
    fully discharged.
    Specifications
    RF stereo transmitter (TMR-RF895R)
    Modulation FM stereo
    Operating frequency
    863.0 MHz – 865.0 MHz
    Maximum output power
    < 10 mW
    Channel Ch1, Ch2, Ch3
    Transmission distance
    Approx. 100 m of longest
    Audio inputs Stereo mini jack
    Power requirements
    DC 12 V (from the supplied AC adaptor)
    Dimensions Approx. 130 mm × 273 mm × 160 mm
    (w/h/d)
    Mass Approx. 265 g
    Rated power consumption
    2.0 W
    Operating temperature
    5°C to 35°C
    Wireless stereo headphones (MDR-
    RF895R)
    Frequency response
    10 Hz – 22,000 Hz
    Power source Supplied rechargeable nickel-metal
    hydride battery BP-HP800-11, or
    commercially available (LR03 (size AAA))
    dry batteries
    Mass Approx. 275 g
    Operating temperature
    5°C to 35°C
    Included items
    RF stereo transmitter TMR-RF895R
    Wireless stereo headphones MDR-RF895R
    AC adaptor (12 V) (1)
    Rechargeable nickel-metal hydride battery
    BP-HP800-11 (1)
    Stereo mini cable (stereo mini plug), 1.5 m (1)
    Card warranty (1)
    Operating Instructions (this manual) (1)
    Design and specifications are subject to change without
    notice.
    Svenska
    Härmed försäkrar Sony Corporation att denna utrustning
    överensstämmer med direktiv 2014/53/EU.
    Den fullständiga texten till EU-försäkran om
    överensstämmelse finns på följande webbadress:
    http://www.compliance.sony.de/
    Dansk
    Herved erklærer Sony Corporation, at dette udstyr er i
    overensstemmelse med direktiv 2014/53 / EU.
    Den fulde ordlyd af EU-overensstemmelseserklæringen er
    tilgængelig på følgende internetadresse:
    http://www.compliance.sony.de/
    Suomi
    Sony Corporation vakuuttaa, että tämä laite on direktiivin
    2014/53/EU mukainen.
    EU-vaatimustenmukaisuusvakuutuksen täysimittainen
    teksti on saatavilla seuraavassa internetosoitteessa:
    http://www.compliance.sony.de/
    Norsk
    Herved erklærer Sony Corporation at utstyrstypen er i
    samsvar med direktiv 2014/53/EU.
    EU-erklæring fulltekst finner du på Internett under:
    http://www.compliance.sony.de/
    Français
    Le soussigné, Sony Corporation, déclare que cet
    équipement est conforme à la Directive 2014/53/UE.
    Le texte complet de la déclaration UE de conformité est
    disponible à l’adresse internet suivante :
    http://www.compliance.sony.de/
    Deutsch
    Hiermit erklärt Sony Corporation, dass diese Funkanlage
    der Richtlinie 2014/53/EU entspricht.
    Der vollständige Text der EU-Konformitätserklärung ist
    unter der folgenden Internetadresse verfügbar:
    http://www.compliance.sony.de/
    Español
    Por la presente, Sony Corporation declara que este equipo
    es conforme con la Directiva 2014/53/UE.
    El texto completo de la declaración UE de conformidad
    está disponible en la dirección Internet siguiente:
    http://www.compliance.sony.de/
    Nederlands
    Hierbij verklaart Sony Corporation dat deze
    radioapparatuur conform is met Richtlijn 2014/53/EU.
    De volledige tekst van de EU-conformiteitsverklaring kan
    worden geraadpleegd op het volgende internetadres:
    http://www.compliance.sony.de/
    Italiano
    Con la presente, Sony Corporation dichiara che questo
    apparecchio è conforme alla Direttiva 2014/53/UE.
    Il testo completo della dichiarazione di conformità UE è
    disponibile al seguente indirizzo Internet:
    http://www.compliance.sony.de/
    Português
    O(a) abaixo assinado(a) Sony Corporation declara que o
    presente equipamento está em conformidade com a
    Diretiva 2014/53/UE.
    O texto integral da declaração de conformidade está
    disponível no seguinte endereço de Internet:
    http://www.compliance.sony.de/
    Slovensky
    Sony Corporation týmto vyhlasuje, že zariadenie je v
    súlade so smernicou 2014/53/EÚ.
    Úplné vyhlásenie EÚ o zhode je k dispozícii na tejto
    internetovej adrese:
    http://www.compliance.sony.de/
    Slovenščina
    Sony Corporation potrjuje, da je ta oprema skladna z
    Direktivo 2014/53/EU.
    Celotno besedilo izjave EU o skladnosti je na voljo na
    naslednjem spletnem naslovu:
    http://www.compliance.sony.de/
    Česky
    Sony Corporation tímto prohlašuje, že toto zařízení je v
    souladu se směrnicí 2014/53/EU.
    Úplné znění EU prohlášení o shodě je k dispozici na této
    internetové adrese:
    http://www.compliance.sony.de/
    Magyar
    A Sony Corporation igazolja, hogy ez a készülék megfelel a
    2014/53/EU irányelvnek.
    Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a
    következő internetes címen:
    http://www.compliance.sony.de/
    Български
    С настоящото, Sony Corporation декларира, че това
    оборудване е в съответствие с Директива 2014/53/EU.
    Цялостният текст на ЕС декларацията за съответствие
    може да се намери на следния интернет адрес:
    http://www.compliance.sony.de/
    Polski
    Sony Corporation niniejszym oświadcza, że to urządzenie
    jest zgodne z dyrektywą 2014/53/UE.
    Pełny tekst deklaracji zgodności UE jest dostępny pod
    następującym adresem internetowym:
    http://www.compliance.sony.de/
    Română
    Prin prezenta, Sony Corporation declară că acest
    echipament este în conformitate cu Directiva 2014/53/UE.
    Textul integral al declarației UE de conformitate este
    disponibil la următoarea adresă internet:
    http://www.compliance.sony.de/
    Ελληνικά
    Με την παρούσα Sony Corporation δηλώνει ότι, αυτή η
    συσκευή πληροί τους όρους της οδηγίας 2014/53/EU.
    Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ
    διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:
    http://www.compliance.sony.de/
    Connect the AC adaptor. Charge the headphones.
    To AC
    outlet
    Connect the A/V component, following hookup or below.
    Using the headphone jack of the A/V component
    Stereo mini plug
    Headphone jack
    (Stereo mini jack)
    TV, Digital music player, etc.
    L (white)
    R (red)
    Stereo mini plug
    Audio out
    (L/R) jacks
    Stereo system, Blu-ray Disc player, DVD player, TV*, etc.
    * In case of no headphone jack.
    If you cannot receive a clear audio signal
    First change the radio frequency with the CHANNEL selector switch on the
    transmitter, then briefly press the AUTO TUNING button on the headphones.
    Noise Reduction process
    The transmitter compresses the audio signal and converts it to RF signal. The headphones convert the received RF
    signal to an audio signal and decompresses it. This process reduces noise picked up during transmission.
    input signal
    output signal
    decompression
    compression
    dynamic range
    Transmitter unit Headphones unit
    RF transmission
    noise level (low)
    1
    2 34
    5
    The transmitter compresses the audio signals dynamic range, then converts it to RF signal.
    Noise may occur due to long distance transmission, etc.
    The headphones convert the RF signal to an audio signal.
    Noise may occur during conversion.
    Decompression of the audio signals dynamic range reduces the noise level and improves the S/N (signal-to-noise)
    ratio.
    Adjust the volume.
    Start playback of the A/V component.Wear the headphones.
    Before listening
    To reduce the risk of hearing damage, first lower the volume.
    Tactile dot
    Up Down
    Tactile dot
    Using the audio out (L/R) jacks of the A/V component
    Use a connection cable (not supplied) between the transmitter and the A/V component.
    If the sound is distorted by connecting the transmitter to the A/V component’s audio out (L/R) jacks, reconnect the transmitter to the headphone jack.
    If the transmitter detects no signal or no sound, check the connection of the connected A/V components, then check the audio setting of the connected A/V components.
    Insert the supplied rechargeable battery BP-HP800-11 into the left housing of the headphones.
    Observe the correct polarity when installing battery.
    Rechargeable nickel-metal hydride
    battery BP-HP800-11 (supplied)
    Insert the
    end first.
    (Green)
    English Wireless Stereo Headphone System
    WARNING
    To reduce the risk of fire or electric shock, do not
    expose this apparatus to rain or moisture.
    To reduce the risk of fire or electric shock, do not expose
    this apparatus to dripping or splashing, and do not place
    objects filled with liquids, such as vases, on the apparatus.
    Do not expose the batteries (battery pack or batteries
    installed) to excessive heat such as sunshine, fire or the
    like for a long time.
    To avoid electrical shock, do not open the cabinet. Refer
    servicing to qualified personnel only.
    Do not install the appliance in a confined space, such as a
    bookcase or built-in cabinet.
    The AC Adaptor is not disconnected from the mains as
    long as it is connected to the AC outlet, even if the unit
    itself has been turned off.
    As the main plug of AC power adaptor is used to
    disconnect the AC power adaptor from the mains, connect
    it to an easily accessible AC outlet. Should you notice an
    abnormality in it, disconnect it from the AC outlet
    immediately.
    Excessive sound pressure from earphones and
    headphones can cause hearing loss.
    The nameplate of transmitter is located on the bottom
    exterior.
    The nameplate of the headphones is located on the back
    side of the slider.
    The validity of the CE marking is restricted to only those
    countries where it is legally enforced, mainly in the
    countries EEA (European Economic Area).
    Hereby, Sony Corporation declares that this equipment is
    in compliance with Directive 2014/53/EU.
    The full text of the EU declaration of conformity is
    available at the following internet address:
    http://www.compliance.sony.de/
    Disposal of waste batteries
    and electrical and electronic
    equipment (applicable in the
    European Union and other
    European countries with
    separate collection systems)
    This symbol on the product, the battery or on the packaging
    indicates that the product and the battery shall not be treated as
    household waste. On certain batteries this symbol might be used in
    combination with a chemical symbol. The chemical symbols for
    mercury (Hg) or lead (Pb) are added if the battery contains more
    than 0.0005% mercury or 0.004% lead. By ensuring these products
    and batteries are disposed of correctly, you will help prevent
    potentially negative consequences for the environment and human
    health which could otherwise be caused by inappropriate waste
    handling. The recycling of the materials will help to conserve natural
    resources.
    In case of products that for safety, performance or data integrity
    reasons require a permanent connection with an incorporated
    battery, this battery should be replaced by qualified service staff
    only. To ensure that the battery and the electrical and electronic
    equipment will be treated properly, hand over these products at
    end-of-life to the applicable collection point for the recycling of
    electrical and electronic equipment. For all other batteries, please
    view the section on how to remove the battery from the product
    safely. Hand the battery over to the applicable collection point for
    the recycling of waste batteries. For more detailed information
    about recycling of this product or battery, please contact your local
    Civic Office, your household waste disposal service or the shop
    where you purchased the product or battery.
    Notice for customers: the following information is only
    applicable to equipment sold in countries applying EU
    directives
    This product has been manufactured by or on behalf of
    Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075
    Japan. Inquiries related to product compliance based on
    European Union legislation shall be addressed to the
    authorized representative, Sony Belgium, bijkantoor van
    Sony Europe Limited, Da Vincilaan 7-D1, 1935 Zaventem,
    Belgium. For any service or guarantee matters, please
    refer to the addresses provided in the separate service or
    guarantee documents.
    Checking the included
    items
    RF stereo transmitter
    TMR-RF895R (1)
    AC adaptor (1)
    Wireless stereo
    headphones MDR-RF895R
    (1)
    Stereo mini cable (stereo
    mini plug), 1.5 m (1)
    Rechargeable nickel-metal
    hydride battery BP-
    HP800-11 (1)
    Features
    Thank you for purchasing the Sony MDR-RF895RK
    Wireless Stereo Headphone System. Before operating the
    unit, please read this manual thoroughly and retain it for
    future reference.
    Some features are:
    Wireless system that allows you to listen to a
    programme free the restriction of a cable
    Up to 100 meters reception range*
    High fidelity sound reproduction
    New mode “VOICE” for clear hearing of personal voice
    range
    Noise reduction system to reproduce a clear sound with
    minimum transmission noise
    Comfortable fit
    Smooth and Comfortable Earpads
    Long playback time (maximum 20 hours)
    Easy recharging function with secure charging
    mechanism
    Rechargeable Battery
    Automatic tuning on headphones for optimum signal
    reception
    3 transmission channels available
    Volume control function and sound effect function on
    the headphones
    * Transmission distance varies depending on conditions of
    use
    (Red)
    (Off)
    Complete when indicator
    turns off.
    Check the CHARGE/
    RED indicator lights
    up red.
    4
    2
    3
    After use
    Turn off the power of the headphones.
    About sending RF signals
    The transmitter starts sending RF signals automatically
    when it detects an audio signal from the connected
    component. Note that;
    Noise may occur depending on the transmitter position
    and room conditions. It is recommended to place the
    transmitter in a location that produces the clearest
    sound.
    If the transmitter is placed on a metallic table, you may
    hear noise, or the reception range may decrease. Do
    not place on a metallic table.
    If no signal or low signal is input
    for about 4 minutes
    When no signal is input for about 4 minutes, the
    transmitter turns off automatically*. The POWER indicator
    of the transmitter blinks for 4 minutes, then turns off. The
    transmitter restarts after receiving an audio signal again.
    The transmitter may also turn off if low signal is input for
    about 4 minutes. In this case, raise the volume of the
    connected A/V component within the range where the
    sound is not distorted, then lower the volume of the
    headphones.
    * If signal noise is output from the connected A/V
    component, the transmitter may not turn off, even
    when no audio signal is input.
    7
    5 6
    1

Zadaj pytanie

Zadaj tutaj pytanie dotyczące Sony MDR-RF895RK innym właścicielom produktu. Podaj jasny i wyczerpujący opis problemu i swoje pytanie. Im lepiej opisany jest twój problem i pytanie, tym łatwiej innym właścicielom Sony MDR-RF895RK udzielić ci dobrej odpowiedzi.

Zobacz tutaj bezpłatnie instrukcję Sony MDR-RF895RK. Przeczytałeś instrukcję, ale czy odpowiada ona na twoje pytanie? Zadaj pytanie innym użytkownikom Sony MDR-RF895RK na tej stronie.

Na sprzedaż w

    Relaterade produkter

    Słuchawka Sony