Sonnet G10E-SFP-1X-E3

Instrukcja obsługi Sonnet G10E-SFP-1X-E3

  • Quick Start Guide
    You Should Have
    The following items should be included in your product package:
    • One Solo10G SFP+ PCIe Card
    • One additional mounting bracket
    • 10GBASE-SR (short-range) SFP+ transceiver
    • QSG
    The following items may be required for installation:
    • Medium Phillips screwdriver
    Computer Compatibility
    Mac Pro
    (Mid 2010 or newer), PC desktop, or server with full-
    height or low-profile PCIe slots
    OS Compatibility
    • macOS
    10.13.6+ (macOS Mojave compatible)
    • Windows
    10, 8, 7; Server 2016, 2012, 2008
    • Linux
    Thunderbolt™ Compatibility
    , Windows, or Linux computer with a Thunderbolt port via a
    Thunderbolt-to-PCIe Card Expansion System
    Driver Information
    For Mac users, the drivers that enable the Solo10G SFP+ PCIe Card
    to work in your computer or Thunderbolt expansion chassis are
    installed as part of macOS 10.13.6 and later; the Sonnet card is ready
    to be used when you power on your computer.
    For Windows users, please go to
    kb.php, click the Computer Cards link, and then the PCIe Cards link.
    Locate and click Solo10G SFP+ PCIe Card link, and then click the
    Driver link. Locate, download, and install the appropriate drivers.
    For Linux users, the drivers that enable the Solo10G SFP+ card to work
    with Linux are installed as part of the Linux Kernel 5.0 and later. For
    earlier versions, please go to,
    click the Computer Cards link, and then the PCIe Cards link. Locate
    and click the Solo10G SFP+ PCIe Card link, and then click the Driver
    link. Locate, download, and install the appropriate drivers.
    Installation Preparation
    Sonnet strongly recommends that you read the section in your
    computer’s user manual that addresses PCI card installation, prior to
    installing the Presto card into your system.
    Card and Transceiver Installation Steps
    1. Shut down your computer or Thunderbolt-to-PCIe card
    expansion system and disconnect it from its power source, and
    then open it to access the expansion card area (PCIe slots); refer
    to the user’s manual for specific information.
    2. Locate an available x4 (4-lane) or larger PCI Express slot and
    then remove its access cover.
    3. Remove the Sonnet card from its packaging, and then install it
    into the PCI Express slot; make sure the card is firmly seated
    and secured.
    4. Close your computer or expansion system, and then reconnect
    it to its power source. If the card is installed in an expansion
    system, also connect the Thunderbolt cable between the
    Thunderbolt ports on the system and computer.
    5. Insert the included 10GBASE-SR transceiver into the card’s SFP+
    6. Connect a cable between the transceiver in the Sonnet card and
    in the switch or device.
    SFP+ PCIe
    10 Gigabit Ethernet PCI Express
    3.0 Adapter Card With
    10GBASE-SR (Short-Range) SFP+ Transceiver
    ©2019 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Presto and Solo10G are trademarks of Sonnet
    Technologies, Inc. Mac, the Mac logo, Mac Pro, and macOS are trademarks of Apple Inc., registered in the United States and
    other countries. Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S. and/or other countries.
    Other product names are trademarks of their respective owners. Product specifications subject to change without notice.
    Support Notes: When handling computer products, you
    must take care to prevent components from being damaged
    by static electricity. Before opening your computer or removing
    parts from their packages, always ground yourself first by touching
    a metal part of the computer, such as a port access cover, and work
    in an area free of static electricity; avoid carpeted areas. Handle all
    electronic components by their edges, and avoid touching connector
    traces and component pins.
    Support Note: This document was up to date at the time
    of printing. However, changes to the hardware or software
    may have occurred since then. Please check the Sonnet website for
    the latest documentation.
    1. Go to
    2. Click the Computer Cards link.
    3. Click the PCIe Cards link.
    4. Click the Solo10G SFP+ PCIe Card link, and then click the
    Documentation link.
    5. Click the Solo10G SFP+ PCIe Card Quick Start Guide [English] link,
    and then check the Document Version information. If the version
    listed is later than this document (revision E), click the Download
    Now button for the latest version.

Zadaj pytanie

Zadaj tutaj pytanie dotyczące Sonnet G10E-SFP-1X-E3 innym właścicielom produktu. Podaj jasny i wyczerpujący opis problemu i swoje pytanie. Im lepiej opisany jest twój problem i pytanie, tym łatwiej innym właścicielom Sonnet G10E-SFP-1X-E3 udzielić ci dobrej odpowiedzi.

Zobacz tutaj bezpłatnie instrukcję Sonnet G10E-SFP-1X-E3. Przeczytałeś instrukcję, ale czy odpowiada ona na twoje pytanie? Zadaj pytanie innym użytkownikom Sonnet G10E-SFP-1X-E3 na tej stronie.


Marka Sonnet
Model G10E-SFP-1X-E3
Produkt Karta/adapter sieciowy
EAN 0732311012525
Język Angielski
Typ pliku PDF
Porty i interfejsy
Technologia łączności Przewodowy
Interfejs hosta PCI Express
Standardowe rozwiązania komunikacyjne Włók✗
Liczba portów 1
Złącze światłowodowe SFP+
Maksymalna szybkość przesyłania danych 10000Mbit/s
Standardy komunikacyjne -
Prędkość transferu danych przez Ethernet LAN 1000, 2500, 5000, 10000Mbit/s
Rodzaj interfejsu sieci Ethernet 10 Gigabit Ethernet, Gigabit Ethernet
Przewodowa sieć lan
Technologia okablowania 10/100BaseT(X)
Wymagania systemowe
Obsługiwane systemy operacyjne Windows
Obsługiwane systemy operacyjne Mac
Obsługiwany systemy operacyjne Linux
Rekomendowane użycie PC

Na sprzedaż w

    Relaterade produkter

    Karta/adapter sieciowy Sonnet