Sigma 10-20mm f3.5 EX DC HSM

Instrukcja obsługi Sigma 10-20mm f3.5 EX DC HSM

(1)
  • Thank you very much for purchasing a Sigma Lens. In order to get
    the maximum performance and enjoyment out of your Sigma lens,
    please read this instruction booklet thoroughly before you start to
    use the lens.
    DESCRIPTION OF THE PARTS (fig.1)
    1. Filter Attachment Thread
    2. Focus Ring
    3. Distance Scale
    4. Focus Index Line
    5. Zoom Ring
    6. Focus Mode Switch
    7. Mount
    8. Lens Hood
    DC LENS
    These are special lenses that are designated for digital cameras
    because the lens image circle is designated to correspond to the
    size of the image sensors of most digital SLR cameras. The
    specialized design gives these lenses the ideal properties for digital
    cameras.
    An image sensor element larger than those corresponding to
    APS-C cannot be used in digital cameras or 35mm SLR cameras.
    If such an element is used vignetting will occur on the picture
    surface.
    If you use SD9, SD10 or SD14 digital cameras, corresponding
    angle of view will be 17-34mm.
    ATTACHING TO CAMERA BODY
    When this lens is attached to the camera body it will automatically
    function in the same way as your normal lens. Please refer to the
    instruction booklet for your camera body.
    On the lens mount surface, there are a number of couplers and
    electrical contacts. Please keep them clean to ensure proper
    connection. To avoid damaging the lens, be especially sure to
    place the lens with its front end down while changing the lens.
    SETTING THE EXPOSURE MODE
    The sigma lens functions automatically after mounting to your
    camera. Please, refer to the camera instruction book.
    FOCUSING AND ZOOMING
    This lens features Sigma’s built-in Hyper Sonic Motor (HSM). The
    HSM enables quick and quiet autofocusing.
    SIGMA AF and CANON AF
    For autofocus operation, set the focus mode switch on the lens to
    the “AF” position (fig.2). If you wish to focus manually, set the focus
    mode switch on the lens to the “M” position. You can adjust the
    focus by turning the focus ring.
    NIKON AF, PENTAX AF and SONY
    For autofocus operation, set the camera to AF mode and set the
    focus mode switch on the lens to the “AF” position (fig.2). If you
    wish to focus manually, set the focus mode switch on the lens to the
    M” position. You can adjust the focus by turning the focus ring.
    Please refer to camera’s instruction manual for details on
    changing the camera’s focusing mode.
    For Nikon, Pentax and Sony mounts, it is only possible to use AF
    with camera bodies which support motors driven by ultrasonic
    waves such as HSM. AF will not function if the camera body does
    not support this type of motor.
    This lens also permits manual focusing even in the autofocus
    mode. With the camera set to the One-Shot AF (AF-S) mode, it is
    possible to manually override the autofocus while the shutter
    release button is pressed halfway.
    When operating this lens in manual focus mode, it is
    recommended that correct focus be confirmed visually in the
    viewfinder rather than relying on the distance scale. This is due to
    possible focus shift resulting from extreme changes in
    temperature which cause various components in the lens to
    expand and contract. Special allowance is made for this at the
    infinity setting.
    Zooming
    Rotate the Rubber grip on the zoom ring to the desired position.
    FLASH PHOTOGRAPHY
    Built-in flash of your camera may not cover angle of view of this
    lens, and this may cause light fall-off at the corners. When external
    flash is used, flip wide panel of your flashgun down to cover flash’s
    head, before taking picture. (This may not work with some
    flashguns, please test your equipment shootings beforehand)
    LENS HOOD
    A bayonet type detachable hood is provided with the lens. This lens
    hood helps to prevent flare and ghosted images caused by bright
    illumination from outside the picture area. Attach the hood and turn
    clockwise until it stops rotation. (fig.3)
    In order to place the lens and hood into the storage case, you
    must first remove the hood, then replace it on the lens in the
    reverse position. (fig.4)
    FILTER
    Only one filter should be used at the time. Two or more filters
    and/or special thicker filters, like a polarizing filter, may cause
    vignetting.
    When using a polarizing filter with AF camera, use the “circular”
    type.
    BASIC CARE AND STORAGE
    Avoid any shocks or exposure to extreme high or low
    temperatures or to humidity.
    For extended storage, choose a cool and dry place, preferably
    with good ventilation. To avoid damage to the lens coating, keep
    away from mothballs or naphthalene gas.
    Do not use thinner, benzine or other organic cleaning agents to
    remove dirt or finger prints from the lens elements. Clean by
    using a soft, moistened lens cloth or lens tissue.
    This lens is not waterproof. When you use the lens in the rain or
    near water, keep it from getting wet. It is often impractical to
    repair the internal mechanism, lens elements and electric
    components damaged by water.
    Sudden temperature changes may cause condensation or fog to
    appear on the surface of the lens. When entering a warm room
    from the cold outdoors, it is advisable to keep the lens in the case
    until the temperature of the lens approaches room temperature.
    TECHNICAL SPECIFICATIONS
    Lens construction 10 – 13
    Angle of View 102.4 – 63.8°
    Minimum Aperture 22
    Minimum Focusing Distance 0.24m (0.79 ft)
    Magnification 1:6.6
    Filter Size 82mm
    Dimensions Dia.×Length
    87.3×88.2mm (3.44×
    3.47in)
    Weight 520g (18.3oz)
    Dimensions and weight include the SIGMA mount.
    ENGLISH
Sigma 10-20mm f3.5 EX DC HSM

Potrzebujesz pomocy?

Liczba pytań: 0

Czy masz pytanie dotyczące Sigma 10-20mm f3.5 EX DC HSM lub potrzebujesz pomocy? Zadaj pytanie tutaj. Podaj jasny i wyczerpujący opis problemu oraz pytanie. Im więcej szczegółów swojego problemu i pytania podasz, tym łatwiej będzie innym właścicielom Sigma 10-20mm f3.5 EX DC HSM poprawnie odpowiedzieć na Twoje pytanie.

Tu możesz bezpłatnie wyświetlić instrukcję dotyczącą Sigma 10-20mm f3.5 EX DC HSM. Ta instrukcja należy do kategorii Soczewki i otrzymała oceny od 1 osób ze średnią 7.1. Ta instrukcja jest dostępna w następujących językach: Angielski. Czy masz pytanie dotyczące Sigma 10-20mm f3.5 EX DC HSM lub potrzebujesz pomocy?

Specyfikacje Sigma 10-20mm f3.5 EX DC HSM

Marka Sigma
Model 10-20mm f3.5 EX DC HSM
Produkt Soczewka
EAN 3610170729587, 4054317283355
Język Angielski
Typ pliku PDF
System obiektywów
Kąt widzenia po przekątnej (maks) 102.4°
Liczba elementów przysłony 7
Maksymalna przesłona 22
Najmniejsza odległość ogniskowa 0.24m
Minimalna przesłona 3.5
Typ obiektywu Szeroki obiektyw
Element dla SLR
Struktura soczewki 13/10
Waga i rozmiary
Wielkość filtra 82mm
Waga produktu 520g
Długość produktu 88.2mm
Średnica 87.3mm
Pozostałe funkcje
Powiekszenie 1:6.6x
Wydajność
Napęd AF HSM
Ręczne ustawianie ostrości
Automatyczne ustawienie ostrości
Kompatybilność -
Kompatybilność marek aparatu Nikon
Konstrukcja
Kolor produktu Czarny

Powiązane instrukcje produktów

Soczewka Sigma

Ta strona korzysta z ciasteczek aby świadczyć usługi na najwyższym poziomie. Dalsze korzystanie ze strony oznacza, że zgadzasz się na ich użycie.

Dowiedz się więcej