Q-See Q-Go

Instrukcja obsługi Q-See Q-Go

  • Manual
    Technical Specifications
    Controls and Features Setup
    Thank you for your purchase of Q-See’s Q-Go HD vehicle
    camera. Please enjoy the confidence and security provided
    by this automated impartial witness as well as the pleasure
    offered by being able to safely record a trip along your favorite
    stretch of highway in full 1080p high definition.
    This camera offers a number of features which allow it to
    best meet your needs. Please read this entire manual before
    operating your camera and retain it for later reference.
    Charge Battery
    To set up your Q-Go HD, use the included car charger. Or,
    use the included USB cable to connect to a powered USB
    port on a computer or 5V USB charger (not included). The
    camera will power on as soon as it has power and will begin
    charging its internal battery. The battery will hold a 10-15 min-
    ute charge, so it is important to keep the camera plugged in.
    Low Power
    Fully Charged
    Install microSD Card
    The Q-Go HD supports microSD cards up to 32GB in size.
    Use a Class 10 card for best results.
    Power On/Off
    The Q-Go HD will turn on and begin recording as soon as it
    is connected to power, such as when it is connected to the
    car charger and the ignition is turned on. It can be turned on
    by pressing and holding the Power button for 1 second. The
    Power/Recording Indicator LED will glow a steady pink. An
    alternating red/pink indicator shows that the camera is record-
    ing video. To turn off the camera, press and hold the Power
    button for 3 seconds.
    IR LEDs (4)
    A/V Output
    LED Monitor
    HDMI Output
    Red=Off, Charging
    Pink= On, Charging
    Pink/Blue = On,
    Memory Card
    Point for Bracket
    • Insert the card as shown. Do not force
    the card or insert it improperly or you
    may damage your camera.
    • When the card is inserted, the camera
    will overwrite any existing data.
    • Press gently on the card to cause it to
    pop out for removal.
    Screen: 2.7” 4:3 TFC LCD
    Lens: 140° super wide
    Languages: English, French, German, Italian, Japanese,
    Portuguese, Russian, Spanish, Chinese
    Video Size: 1080p/720p/480p
    Video Format: AVI
    Photo Resolution: VGA, 3MP, 5MP, 8MP, 12MP
    Photo Format: JPG
    Shooting Modes: Single, Self Timer (2, 5, 10 sec), Continuous
    TV Output: NTSC/PAL
    USB Port: USB 2.0
    Power Supply: 5V 500mA
    Battery: Built-in (063525PL)
    Supported OS: Windows 2000/XP/Vista/7,8,10
    Macintosh 10.3.6 or above
Q-See Q-Go

Potrzebujesz pomocy?

Liczba pytań: 0

Czy masz pytanie dotyczące Q-See Q-Go lub potrzebujesz pomocy? Zadaj pytanie tutaj. Podaj jasny i wyczerpujący opis problemu oraz pytanie. Im więcej szczegółów swojego problemu i pytania podasz, tym łatwiej będzie innym właścicielom Q-See Q-Go poprawnie odpowiedzieć na Twoje pytanie.

Tu możesz bezpłatnie wyświetlić instrukcję dotyczącą Q-See Q-Go. Ta instrukcja należy do kategorii Kamery i otrzymała oceny od 1 osób ze średnią 7.5. Ta instrukcja jest dostępna w następujących językach: Angielski. Czy masz pytanie dotyczące Q-See Q-Go lub potrzebujesz pomocy? Zadaj pytanie tutaj

Specyfikacje Q-See Q-Go

Marka Q-See
Model Q-Go
Produkt Kamera
EAN 0645439252486, 0818241976080
Język Angielski
Typ pliku PDF

Często zadawane pytania

Poniżej znajdziesz najczęściej zadawane pytania dotyczące: Q-See Q-Go.

Twojego pytania nie ma na liście? Zadaj pytanie tutaj