Press the on/off switch. Screen A appears, and the mode A is set.
The pilot lamp blinks red showing the unit is charging.
In a few seconds, the pilot lamp turns green.
The display screen automatically turns off in about 30 seconds after the
setting job is terminated.
For a test-flash, press the pilot lamp.
To turn off the flash unit manually, press the on/off switch and hold it for 2
seconds.
Turn off the power switch of both MG8000
and the camera.
Turn the lock ring of MG8000 to loosen it
all the way as shown in the picture.
Slide the mounting foot of MG8000 into
the hotshoe of the camera.
Turn the lock ring to opposite direction
and tighten it.
1.
2.
3.
4.
Lock pin comes out to hook the foot at the
hotshoe for sure contact.
5.
Loosen the lock ring and slide the mounting foot of MG8000 off the hotshoe
of the camera.Make sure to turn the lock ring all the way to completely
clear the lock pin off the hooking slot on the hotshoe.
Turn on the flash unit
Removing MG8000 from the Camera
3.6
MG0512N REV.1.3
Flash head/
Wireless transmitter
Sub-Flash
AF-assist light
External auto exposure sensor
Rotating
display screen
Set button
Pilot lamp (Test flash button)
On/Off switch (System lock button)
Select button
Select button
Battery magazine
Lock ring
X-terminal
USB service port
Power Pack socket
Hotshoe contacts
Foot lock pin
External service
box
Mounting foot
Multifunction button
Remote/ Slave sensor
Distributed in Canada by Gentec International
Markham, Ontario L3R 9X6 • www.gentec-intl.com
Whatsapp
Mail
Facebook
Potrzebujesz pomocy?
Liczba pytań: 0
Czy masz pytanie dotyczące Nissin MG8000 Extreme lub potrzebujesz pomocy? Zadaj pytanie tutaj. Podaj jasny i wyczerpujący opis problemu oraz pytanie. Im więcej szczegółów swojego problemu i pytania podasz, tym łatwiej będzie innym właścicielom Nissin MG8000 Extreme poprawnie odpowiedzieć na Twoje pytanie.
Informacje o: Nissin MG8000 Extreme
Tu możesz bezpłatnie wyświetlić instrukcję dotyczącą Nissin MG8000 Extreme. Ta instrukcja należy do kategorii Lampy błyskowe i otrzymała oceny od 1 osób ze średnią 9.3. Ta instrukcja jest dostępna w następujących językach: Angielski. Czy masz pytanie dotyczące Nissin MG8000 Extreme lub potrzebujesz pomocy? Zadaj pytanie tutaj
Mounting MG8000 on the CameraQuick Manual for Nikonorwait 8 sec.hold 2 sec.POWER ONFunctionPilot LampConfirm pressOn/OffSelect function pressor wait 8 sec.Press on/offSetFUNCTION SETNomenclaturePress the on/off switch. Screen A appears, and the mode A is set.The pilot lamp blinks red showing the unit is charging.In a few seconds, the pilot lamp turns green.The display screen automatically turns off in about 30 seconds after thesetting job is terminated.For a test-flash, press the pilot lamp.To turn off the flash unit manually, press the on/off switch and hold it for 2seconds.Turn off the power switch of both MG8000and the camera.Turn the lock ring of MG8000 to loosen itall the way as shown in the picture.Slide the mounting foot of MG8000 intothe hotshoe of the camera.Turn the lock ring to opposite directionand tighten it.1.2.3.4.Lock pin comes out to hook the foot at thehotshoe for sure contact.5.Loosen the lock ring and slide the mounting foot of MG8000 off the hotshoeof the camera. Make sure to turn the lock ring all the way to completelyclear the lock pin off the hooking slot on the hotshoe.Turn on the flash unitRemoving MG8000 from the Camera3.6MG0512N REV.1.3Flash head/Wireless transmitterSub-FlashAF-assist lightExternal auto exposure sensorRotatingdisplay screenSet buttonPilot lamp (Test flash button)On/Off switch (System lock button)Select buttonSelect buttonBattery magazineLock ringX-terminalUSB service portPower Pack socketHotshoe contactsFoot lock pinExternal serviceboxMounting footMultifunction buttonRemote/ Slave sensorDistributed in Canada by Gentec InternationalMarkham, Ontario L3R 9X6 • www.gentec-intl.com