Casio GLX-5600-1ER

Instrukcja obsługi Casio GLX-5600-1ER

(2)
  • Operation Guide 3151
    1
    MO0803-EA
    Getting Acquainted
    Congratulations upon your selection of this CASIO watch. To get the most out of your
    purchase, be sure to read this manual carefully.
    Warning!
    The measurement functions built into this watch are not intended for use in taking
    measurements that require professional or industrial precision. Values produced
    by this watch should be considered as reasonably accurate representations only.
    The longitude, lunitidal interval, Moon phase indicator and tide graph data that
    appear on the display of this watch are not intended for navigation purposes.
    Always use proper instruments and resources to obtain data for navigation
    purposes.
    This watch is not an instrument for calculating low tide and high tide times. The
    tide graph of this watch is intended to provide a reasonable approximation of tidal
    movements only.
    CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any
    claims by third parties that may arise through the use of this watch.
    About This Manual
    Button operations are indicated using the letters shown
    in the illustration.
    Each section of this manual provides you with the
    information you need to perform operations in each
    mode. Further details and technical information can be
    found in the “Reference” section.
    General Guide
    Press C to change from mode to mode.
    In any mode (except when a setting screen is on the display), press B to illuminate
    the display.
    Stopwatch Mode
    World Time ModeTide/Moon Data Mode
    Countdown Timer ModeAlarm Mode
    Press C.
    Timekeeping Mode
    Timekeeping
    Use the Timekeeping Mode to set and view the current
    time and date.
    The tide graph shows tidal movements for the current
    date in accordance with the current time as kept in the
    Timekeeping Mode.
    The Moon phase indicator shows the current Moon
    phase in accordance with the current date as kept in the
    Timekeeping Mode.
    Important!
    Be sure to configure the current time and date, and your
    Home Site data (data for the site where you use the
    watch) correctly before using the functions of this watch.
    See “Home Site Data” for more information.
    Day of week
    Month – Day
    Tide graph
    Moon phase indicator
    Hour : Minutes Seconds
    PM indicator
    Setting the Time and Date
    This watch is preset with UTC differential values that represent each time zone
    around the globe. Before setting the time, be sure to set the UTC differential for your
    Home Site first, which is the location where you normally will be using the watch.
    Note that World Time Mode times are all displayed based on the time and date
    settings you configure in the Timekeeping Mode.
    To set the time and date
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    Be sure to configure the correct UTC differential for
    your Home Site before configuring any other
    Timekeeping Mode settings.
    See the “UTC Differential/City Code List” for information
    about the UTC differential settings that are supported.
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    Seconds
    2. Press C to move the flashing in the sequence shown below to select other
    settings.
    Hour
    UTC
    Differential
    Minutes
    Year
    DST
    Day
    Month
    Seconds
    Flash Alert
    3. When the setting you want to change is flashing, use D and B to change it as
    described below.
    Reset the seconds to 00
    Toggle between Daylight Saving
    Time (
    ON) and Standard Time
    (
    OFF)
    Press D.
    Press D.
    To do this: Do this:Screen
    See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
    The UTC differential setting range is –12.0 to +14.0, in 0.5-hour units.
    When DST is turned on, the UTC differential setting range is –11.0 to +15.0, in
    0.5-hour units.
    For information about Flash Alert, see “Flash Alert”.
    4. Press A twice to exit the setting screen.
    The day of the week is displayed automatically in accordance with the date (year,
    month, and day) settings.
    Specify the UTC differential
    Change the hour or minutes
    Change the year, month or day
    Use D (+) and B (–).
    Use D (+) and B (–).
    Use D (+) and B (–).
    To toggle between 12-hour and 24-hour timekeeping
    In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-
    hour timekeeping.
    With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
    times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
    hour digits for times in the range of midnight to 11:59 a.m.
    With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
    any indicator.
    The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
    applied in all other modes.
    Daylight Saving Time (DST) Setting
    Daylight Saving Time (summer time) advances the time setting by one hour from
    Standard Time. Remember that not all countries or even local areas use Daylight
    Saving Time.
    To toggle the Timekeeping Mode time between DST and Standard Time
    1.In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    2. Press C once and the DST setting screen appears.
    3. Press D to toggle between Daylight Saving Time (
    ON
    displayed) and Standard Time (OFF displayed).
    4. Press A twice to exit the setting screen.
    The DST indicator appears on the Timekeeping, and
    Tide/Moon Data screens to indicate that Daylight Saving
    Time is turned on. In the case of the Tide/Moon Data
    Mode, the DST indicator appears on the Tide Data
    screen only.
    Home Site Data
    Moon phase, tide graph data, and Tide/Moon Data Mode data will not be displayed
    properly unless Home Site data (UTC differential, longitude and lunitidal interval) is
    configured correctly.
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    DST indicator
    On/Off status
    The UTC differential indicates the time differential with Greenwich, England.
    The letters UTC is the abbreviation for Coordinated Universal Time, which is the
    world-wide scientific standard of timekeeping. It is based upon carefully maintained
    atomic (cesium) clocks that keep time accurately to within microseconds. Leap
    seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s
    rotation.
    The lunitidal interval is the time elapsing between the Moon’s transit over a meridian
    and the next high tide at that meridian. See “Lunitidal Interval” for more information.
    This watch displays lunitidal intervals in terms of hours and minutes.
    The “Site/Lunitidal Interval Data List” provides UTC differential and longitude
    information around the world.
    The following is the initial factory default Home Site data (Tokyo, Japan) when you
    first purchase the watch and whenever you have the battery replaced. Change these
    settings to match the area where you normally use the watch.
    UTC differential (+9.0); Longitude (East 140 degrees); Lunitidal interval (5 hours,
    20 minutes)
    To configure Home Site data
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    2. Press C twice to display the UTC differential setting
    screen, and confirm that the setting is correct.
    If the UTC differential setting is not correct, use D (+)
    and B (–) to change it.
    3. Press A to display the longitude value setting screen.
    4. Press C to move the flashing in the sequence shown
    below to select other settings.
    Lunitidal Interval
    Hours
    Lunitidal Interval
    Minutes
    Longitude
    (East/West)
    Longitude
    Value
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    Longitude value
    Longitude (East/West)
Casio GLX-5600-1ER

Potrzebujesz pomocy?

Liczba pytań: 1

Czy masz pytanie dotyczące Casio GLX-5600-1ER lub potrzebujesz pomocy? Zadaj pytanie tutaj. Podaj jasny i wyczerpujący opis problemu oraz pytanie. Im więcej szczegółów swojego problemu i pytania podasz, tym łatwiej będzie innym właścicielom Casio GLX-5600-1ER poprawnie odpowiedzieć na Twoje pytanie.

Emilia, 2015-11-27 13:36:10 Bez komentarza

Witam. Jeśli to nie problem Proszę o przesłanie instrukcji obsługi zegarka G-SHOCK G-LIDE. GLX-5600. Jeśli można w języku polskim. Pozdrawiam

Odpowiedz na to pytanie

Tu możesz bezpłatnie wyświetlić instrukcję dotyczącą Casio GLX-5600-1ER. Ta instrukcja należy do kategorii Zegarki i otrzymała oceny od 2 osób ze średnią 8.8. Ta instrukcja jest dostępna w następujących językach: Angielski. Czy masz pytanie dotyczące Casio GLX-5600-1ER lub potrzebujesz pomocy? Zadaj pytanie tutaj

Specyfikacje Casio GLX-5600-1ER

Ogólne
Marka Casio
Model GLX-5600-1ER
Produkt Zegarek
Język Angielski
Typ pliku PDF
Szczegóły Techniczne
Stoper
Funkcja world time
Zegar 1/1min - 24h
Funkcja alarmu
Kalendarz
Dokładność ±15sek/miesiąc
Odporny na wstrząsy
Funkcja wstrzymania
Tryb zegarka 12 h/24 h
Wodoodporny do 200m
Konstrukcja
Typ szkła mineral
Materiał obudowy resin
Tworzywo paska resin
Moc
Rodzaj baterii CR2025
Czas eksploatacji baterii 7rok/lata
Liczba baterii 1
Pozostałe funkcje
Wymiary produktu (SxGxW) 43.2 x 12.7 x 46.7mm
Waga i rozmiary
Waga produktu 52.5g

Często zadawane pytania

Poniżej znajdziesz najczęściej zadawane pytania dotyczące: Casio GLX-5600-1ER.

Twojego pytania nie ma na liście? Zadaj pytanie tutaj

InstrukcjaObslugiPDF.pl

Szukasz instrukcji? InstrukcjaObslugiPDF.pl zapewnia, że szybko znajdziesz instrukcję, której szukasz. Nasza baza danych zawiera ponad milion instrukcji PDF od ponad 10 000 marek. Codziennie dodajemy najnowsze instrukcje, abyś zawsze znalazł produkt, którego szukasz. To bardzo proste: po prostu wpisz nazwę marki i rodzaj produktu w pasku wyszukiwania, a od razu będziesz mógł przejrzeć instrukcję online za darmo.

InstrukcjaObslugiPDF.pl

© Copyright 2020 InstrukcjaObslugiPDF.pl. Wszystkie prawa zastrzeżone.

Ta strona korzysta z ciasteczek aby świadczyć usługi na najwyższym poziomie. Dalsze korzystanie ze strony oznacza, że zgadzasz się na ich użycie.

Dowiedz się więcej