Canon EF 70-200mm F2.8L USM

Instrukcja obsługi Canon EF 70-200mm F2.8L USM

(1)
  • Thank you for purchasing a Canon product.
    Safety Precautions
    1.
    Do not look at the sun or a bright light source through the
    lens or camera.
    Doing so could result in loss of vision. Looking
    at the sun directly through the lens is especially hazardous.
    2.
    Whether it is attached to the camera or not, do not leave the
    lens under the sun without the lens cap attached.
    This is to
    prevent the lens from concentrating the sun’s rays, which could
    cause a fire.
    Handling Cautions
    If the lens is taken from a cold environment into a warm one,
    condensation may develop on the lens surface and internal
    parts.
    To prevent condensation in this case, first put the lens
    into an airtight plastic bag before taking it from a cold to
    warm environment. Then take out the lens after it has warmed
    gradually. Do the same when taking the lens from a warm
    environment into a cold one.
    1. Mounting and Detaching the Lens
    See your camera’s instructions for details on mounting and
    detaching the lens.
    After detaching the lens, place the lens with the rear end up to
    prevent the lens surface and contacts from getting scratched.
    If the contacts get soiled, scratched, or have fingerprints on them,
    corrosion or faulty connections can result. The camera and lens
    may not operate properly.
    If the contacts get soiled or have fingerprints on them, clean them
    with a soft cloth.
    If you remove the lens, cover it with the dust cap. To attach it
    properly, align the lens mount index and the
    index of the dust
    cap, and turn clockwise. To remove it, reverse the order.
    2. Setting the Focus Mode
    To shoot in autofocus (AF) mode, set the focus mode switch to AF
    .
    To shoot in manual focus (MF) mode, set the focus mode switch to
    MF, and focus by turning the focusing ring. The focusing ring always
    works, regardless of the focus mode.
    After autofocusing in ONE SHOT AF mode, focus manually by
    pressing the shutter button halfway and turning the focusing
    ring. (Full-time manual focus)
    3. Zooming
    To zoom, turn the lens’ zoom ring
    .
    Be sure to finish zooming before focusing. Changing the zoom
    ring after focusing can affect the focus.
    4. Infrared Index
    The infrared index corrects the focus setting when using
    monochrome infrared film.
    Focus on the subject in MF, then adjust the distance setting by
    moving the focusing ring to the corresponding infrared index mark
    .
    The infrared index position is based on a wavelength of 800 nm.
    Be sure to observe the manufacturer’s instructions when using
    infrared film.
    Use a red filter also when you take the picture.
    Nomenclature
    Hood mount
    Zoom ring
    Focusing ring
    Zoom position index
    Distance scale
    Focus mode switch
    Lens mount index
    Contacts
    Distance index
    Infrared index
    EF Zoom Lenses
    EF17-35mm f/2.8L USM
    EF28-70mm f/2.8L USM
    EF70-200mm f/2.8L USM
    Instructions
    COPY

Potrzebujesz pomocy?

Liczba pytań: 0

Czy masz pytanie dotyczące Canon EF 70-200mm F2.8L USM lub potrzebujesz pomocy? Zadaj pytanie tutaj. Podaj jasny i wyczerpujący opis problemu oraz pytanie. Im więcej szczegółów swojego problemu i pytania podasz, tym łatwiej będzie innym właścicielom Canon EF 70-200mm F2.8L USM poprawnie odpowiedzieć na Twoje pytanie.

Tu możesz bezpłatnie wyświetlić instrukcję dotyczącą Canon EF 70-200mm F2.8L USM. Ta instrukcja należy do kategorii Soczewki i otrzymała oceny od 1 osób ze średnią 9.7. Ta instrukcja jest dostępna w następujących językach: Angielski. Czy masz pytanie dotyczące Canon EF 70-200mm F2.8L USM lub potrzebujesz pomocy?

Ta strona korzysta z ciasteczek aby świadczyć usługi na najwyższym poziomie. Dalsze korzystanie ze strony oznacza, że zgadzasz się na ich użycie.

Dowiedz się więcej